Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21761-001.fm
2/8
6
Connecting rod
TCD 2013 2VW 06-01-01
Removing the big end bearing cap
Set lifting journal at bottom dead centre (BDC).
Unscrew screws (1).
Remove big end bearing cap (2).
Remove bearing shell.
Lay out components in the order in which
they should be installed.
Note order of cylinders.
1
2
© 44248-0
Press out the piston and connection rod.
Lay out components in the order in which
they should be installed.
Note order of cylinders.
© 44249-0
Remove con rod bearing shells (1).
Visually inspect the components.
1
© 44250-0