Workshop Manual

© 02/2010 OBJ_DOKU-21760-001.fm
5/6
6
Crankshaft
TCD 2013 2V W 05-05-03
● Fix both thrust ring halves with a little grease to the
bearing cap.
Use lower thrust ring halves with guide lug
(arrow).
Install thrust ring halves according to mea
-
sured axial clearance.
Bearing cap with identification “2“.
The oil grooves (1) face the crankshaft
web face.
1
2
© 42663-0
● Insert bearing cap (1).
The gate (arrow) on the bearing cap faces
the manifold side.
1
© 44185-0
● Tighten screws (arrows).
– Stage 1:
 50 Nm
– Stage 2:
 60°
– Stage 3:
 60°
Attention!
Screws can be used a maximum 3 times
with written documentation.
Use socket wrench insert.
© 44186-0