Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21760-001.fm
2/6
6
Crankshaft
TCD 2013 2VW 05-05-03
Unscrew screws (1).
Remove bearing cap (2).
Remove lower bearing shell.
Remove both thrust ring halves (arrows).
Use socket wrench insert.
1
2
1
© 44181-0
Remove both thrust ring halves (arrows).
© 44182-0
Measure the wall thickness of the thrust ring halves.
Standard
2,9 mm
Select thrust ring halves according to measured val
-
ue.
© 43504-0
+0.05
0