Workshop Manual

Table Of Contents
© 02/2010 OBJ_DOKU-21758-001.fm
10/12
6
Crankshaft
TCD 2013 2VW 05-05-01
Mount big end bearing cap.
Attention!
Note the assignment of the big end bearing
cap.
The identification numbers (1) on the con
rod and the big end bearing cap must be
identical and opposite to each other when
assembled.
26519
26519
1
© 44244-0
Tighten new screws with rotation angle disc.
Stage 1:
30 Nm
Stage 2:
60°
Stage 3:
60°
© 44245-0
Unscrew screws (2).
Remove turning gear (1).
2
1
© 44222-0