Operation Manual

Section:
Page:
Engine:
Operating the Engine
4
4-0-07
S/BVM 628
© 0185
Item Job A B C Reference
8 Cooling water system Top up water level ●
Check water level
in header tank ●●●
Bleed water system
if necessary ●●
Treat water with additives ●● Section 6.4
Clean separate raw water filter
(if provided) ●
Open valves in all water
pipework and check
for correct valve positions ●●
Switch on water preheater ●●●
Switch on injection valve
water preheater ●●●
(if provided)
Section 6.3
Switch on injection valve
coolant pump ●●●
9 Pneumatic system Check that master and Job 01.11.01
starting valves
move freely ●●Job 10.03.01
Drain condensate from dust coll. ●●Job 10.03.02
Drain condensate from
pressure reducer station ●●Job 10.06.01
Clean / install running-in
screen upstream ●●Job 10.03.91
of master valve
Drain water from
air receivers ●●●Job 10.01.01
Check pressure in
air receivers ●●●Job 10.01.01