Operation Manual

Section:
Page:
Engine:
Operating the Engine
4
4-0-02
S/BVM 628
© 0185
Item Job A B C Reference
6 Fuel system
Clean fuel service tank ●
Top up fuel service tank ●●
Clean fuel filter ●●Job 07.10.01
Test fuel injectors ●●Job 07.08.01
Check oil level in
sealing oil tank ●●
Drain fuel service tank ●●
Open shut-off valve of fuel
service tank and switch on
fuel feed pump (if installed) ●●●
Bleed fuel system ●● Job 07.03.02
7 Lube oil system
Top up lube oil reservoir ●
Check up lube
oil reservoir ●●●
Service lube oil
filter combination ●● Job 08.10.01
Switch on priming pump
and keep priming pressure
for min. 3 minutes ●●● > 0,35 bar
Switch on priming pump
(if standby oil pump) ●●●
8 Cooling water system Top up water level ●
Check up water level
in header tank ●●●
Bleed water system,
if need be ●●