Operation Manual

Table Of Contents

Job Card No.:

Engine:

Filing No.:

Pressure Reducer Station

Servicing

0178-32-10 1383

Servicing

Drain condensate and clean filter elements. This is

possible while the engine is running.

In hand lever position I and III, the H.P. lien is

connected to the L.P. line through one filter

and one pressure reducer each. The low pres-

sure is indicated by gauge (6) direct; it can be

adjusted with screws (5). In lever position II,

both filters and pressure reducers are connec-

ted in the L.P. line. In position IV, the H.P. lien is

isolated, while the L.P. line is connected to the

atmosphere.

Job

Draining Condensate

Operate rods (1).

Cleaning the Filter

Clean only filters not in service: filter(4) in lever

position I and filter (3) in position III.

With the engine shut down, both filters can be

cleaned in position IV.

Procedure

Unscrew plug and remove filter. After cleaning filter,

dry by air blast. Reinstall filter and fit plug with

washer.

10.06.01

S/BV M 628

Tools.

- Standard tools