Operation Manual

Table Of Contents

Job Card No.:

Engine:

Filing No.:

Combined Lube Oil Filter (with Paper Micro Filter)

Servicing

0178-15-10 1659

08.10.01 Page 2 of 2

S/BVM 628

Fig. 3 Change paper filter

Fig. 2 Oil draining

Fig. 1 Paper filter (sectional view)

Change paper filter cartridge (Fig. 3) and clean filter

chamber.

Stop engine. Place pail beneath hose connector 24

(Fig. 2) and open plug 25 to drain oil from filter.

Release hex. nuts 7 (Fig. 3) and work loose cover 12

by lever or screwdriver. Remove O-seal 6 and nut 11.

Clamping piece 16 is under spring pressure.

Carefully pull out piece 16 and filter cartridge

13. Clean filter chamber, taking care that no

dirt will enter the clean space of filter. Follo-

wing cleaning, refit plug 25 (Fig. 2). Check that

seals 15 (Fig. 3) are in good order and properly

seated. Carefully install new cartridge 13. Fit

clamping piece 16. Screw nut 11 in place and

tighten securely. Fit O-seal 6 (renewing if ne-

cessary) and secure cover 12 with hex. nuts 7.

Job