Operation Manual

Job Card No.:
Engine:
Filing No.:
Oil Filter Combination
(Backflushing Wire Edge Filter)
0178-15-10 6508
Servicing and Repair
Inserted in the lube oil primary flow is a filter combi-
nation comprising a paper microfilter preceding the
wire edge filter (see also Job 08.10.01).
The wire edge filter can be equipped at option with a
differential pressure warning system which responds
in case of excessive contamination.
Servicing
● Daily
- Turn rotary handle (5) through about 1 _ turns.
- Press lever (18) down as far as it will go, and
hold.
- Turn rotary handle (5) again through about 1-2
turns.
- Release lever (18).
Repeat this procedure on each wire edge
filter element.
● Clean filter chamber and wire edge filter element:
- 10 running hours after engine overhaul;
- if resistance is felt when turning at the rotary
handle;
- when differential pressure alarm is given.
Remove wire edge filter element only if
absolutely necessary.
Repair:
Renew wire edge filter element:
● at the intervals given in the maintenance chart;
● whenever the wire edge filter element is dama-
ged.
© 0193
08.09.01 Page 1 of 3
S/BVM 628
Tools:
- Standard tools
Aids:
- Pail
- Cleaning brush
- Diesel fuel
Job Card:
- 08.10.01
Fig. 1 Turning the wire edge filter
© 50 662 1