Operation Manual

Table Of Contents

Job Card No.:

Engine:

Filing No.:

Lube Oil Pump

Servicing

0178-14-10 1814

08.04.01 Page 3 of 3

S/BVM 628

Apply a continuous bead of Deutz DW 48 compound

(bead not exceeding 3 mm in width for optimum

sealing) to cover (8) - Fig. 4 -. Fit cover(25) and

tighten by hex. bolts (24).

Refitting the Pump (Fig. 5)

Secure pump (3) with new O-seal (23) by hex. bolts

(5) to pump chest. Reconnect all piping: Fill pump

with oil.

Make sure that pump never runs dry.

When putting pump back to service, check

that it has to leaks.

Fig. 4

Fig. 5

bead