Operation Manual

Job Card No.:
Engine:
Filing No.:
Barber-Colman plus 8 Electronic Governor Linkage
Setting
0178-29-10 1811
© 1283
05.04.14 Page 7 of 12
S/BV 9 M 628
Then adjust distance between stop piston
("Stop" position) at point A15 (Fig. 10) and
shock absorber. Lock grooved nut (*).
8. Refit the tools (see under 5.) , then check
whether, at operating position of the spring-
loaded cylinder A15 (Fig. 11) and contact of
the control rods at the check stops (points
A18, A19 and A20), there is a clearance of
approx. 15 mm.
Secure grooved nut (*) with Deutz DW 59 as
specified.
Fig. 11
Fig. 10
© 24 932 1
© 24 933 1