Operation Manual

Table Of Contents

Job Card No.:

Engine:

Filing No.:

Woodward UG8D/UG8L Hydraulic Governor Linkage

Setting

0178-29-10 1808

05.04.14 Page 3 of 12

S/BV 6/8 M 628

Refitting the Linkage

For following operations, see also Fig. 1.

Checking Linkage Settings

1. Before refitting links C1and C3, check pertaining distance dimensions.

They must be as follows:

Link C1 = 310 mm, see Fig. 3

Link C3 = 78 mm, see Fig. 3

Fig. 3

When Removing Governor

Unscrew fastening bolt (*) - Fig. 3), remove link C3 and take down governor.

Mid-

pos.