Operation Manual

Job Card No.:
Engine:
Filing No.:
Regulateurs Europa Ltd. Hydraulic Governor Linkage
Setting
0178-29-10 1806
© 0583
05.04.14 Page 7 of 11
S/BV 6/8 M 628
Then adjust distance between stop piston
("Stop" position) at point A15 (Fig. 10) and
shock absorber. Lock grooved nut (*).
8. Refit the tools (see under 5.) , then check
whether, at operating position of the spring-
loaded cylinder A15 (Fig. 11) and contact of
the control rods at the check stops (points A18
and A19), there is a clearance of approx. 15
mm.
Secure grooved nut (*) with Deutz DW 59 as
specified.
Fig. 11
Fig. 10
© 24 933 1
© 24 932 1