Operation Manual

Job Card No.:
Engine:
Filing No.:
Engine Timing
0178-10-10 2069
04.05.01 Page 2 of 3
S/BV 6/8/9 M 628
© 0592
● Unscrew waisted hex. bolt (5).
● Take off starting cam (4).
● Remove dowel pin (6).
● Remove locking wires of cheese-head bolts (3)
and turn out bolts
● Take off gear (1).
● Remove dowel pin (2).
● Screw guide arbor with its short grub screw end
into camshaft at engine driving end.
● Carefully pull out camshaft while turning it.
● Carfully place camshaft on two wooden sup-
ports.
Removing camshaft towards engine driving end
● Screw off hex. nuts (13) and unscrew hex. bolts (9).
● Take off cover (14) and gasket (8).
● Bend up locking plate (12).
● Turn out hex. bolt (11).
● Take off guide roller (7) and guide plate (6).
● Remove dowel pin (10).
● Screw guide arbor with its long grub screw end
into camshaft at engine free end.
● Unscrew hex. bolt (5).
● Take off starting cam (4).
● Remove dowel pin (6).
● Remove locking wires of cheese-head bolts (3)
and turn out bolts
● Take off gear (1).
● Remove dowel pin (2).
● Turn camshaft and pull or resp. push out.
● Carefully pull out camshaft while turning it.
Fig. 4 Camshaft drive gear "KS"
Fig. 5 Camshaft fixing
Fig. 6 Camshaft drive gear "KS"
© 50 528 1
© 50 528 1
© 50 642 1