Operation Manual

Table Of Contents

Job Card No.:

Engine:

Filing No.:

Crankweb Deflection

Gauging

03120364-0178

02.02.01 Page 2 of 3

S/BV 6/8/9 M 628

Job:

Introduce gauge into marks punched into webs

(not beween balance weights) and rotate several

times in this position. Set gauge to 25/100 of scale

in measuring positions (1) or (2).

When using a mirror, check readings especi-

ally carefully.

For taking readings, turn crankshaft counter-

clockwise, without touching the gauge.

With piston in situ: Take readings in position 2, 3,

4, 5 and 6

With piston removed: Take readings in positions 1,

3, 4 and 5.

Measuring position as viewed from the engine's

driving end:

Measuring Crankpin

position position

1 Lowest

2 First auxiliary

3 First horizontal

4 Highest

5 Second horizontal

6 Second auxiliary

For measuring the deflection, turn crankshaft coun-

ter-clockwise.

Meßstellungen

Measuring positions