Operation Manual

Section:
Page:
Engine:
Maintenance Schedule
8
8-1-03
S/BVM 628
© 1199
8.1.2 Daily maintenance jobs, see Section 4.3
8.1.3 Periodic maintenance jobs for engines running in continuous operation,
e.g. marine engines > 300 hours / year.
All fittings, shutoff and control devices of operating media systems as well as of compressed air piping
system shall be maintained according to manufacturer’s specifications.
Ser. Periodic Maintenance Jobs Job See
No. Card No. Footnotes
Checking and servicing engine coolant containing additives on X
1
non-mineral oil basis
1 Interval: every 250 engine running hours
Inspecting valve rotator 01.03.01
Cleaning turbocharger turbine (depending on fuel quality grade) 06.13.01 M
1
/M
2
/M
3
Servicing centrifugal lube oil filter 08.13.01
Servicing light barrier of crankcase oil mist detector 11.05.01 X
Inspecting coolant circulation pump 09.07.01 X
2 Interval: every 500 engine running hours
Jobs as under ser. No. 1
Cleaning fuel twin filter 07.10.01 X
Cleaning filter of pressure reducer station 10.06.01 X
3 Interval: every 750 engine running hours
Jobs as under ser. No. 1
Checking engine coolant containing anticorrosive oil X
acc. to Section 6.4
4 Interval: every 1000 engine running hours
Jobs as under ser. Nos. 1 and 2
Checking inlet and exhaust valve clearances 01.01.01 M
3
Inspecting combustion chamber 01.05.04 M
3
Changing oil of turbocharger 06.05.01 X
5
Inspecting injectors 07.08.01 M
3
Cleaning dirt trap 10.03.02
Inspecting crankcase oil mist detector 11.05.01 X
5 Interval: every 1500 engine running hours
Jobs as under ser. Nos. 1 to 3
Checking inlet and exhaust valve clearances 01.01.01 D/M
1
/M
2
Inspecting combustion chamber 01.05.04 M
1
/ M
2
Inspecting injectors 07.08.01 M
1
/ M
2
Analyzing lube oil samples 08.01.01
Servicing lube oil paper microf ilter 08.10.01 M
1
/M
2
/ M
3
Inspecting temperature monitors for oil, water and air 11.01.01
Inspecting pressure monitors for oil, water and air 11.01.02
Inspecting flow monitor 11.01.03 X
Inspecting overspeed protection 11.03.01
Inspecting oil level float switch 11.07.01 X
Inspecting service-alarm switch for lube oil wire edge filter 11.08.01 X