Operation Manual

Section:
Page:
Engine:
Table of contents
0
0-0-02
S/BVM 628
© 0884
3 Specification Data
3.1 Model Designation
3.2 Designation of Engine Ends and Sides and Related Definitions
3.3 Basic Data
3.3.1 Design Data
3.3.2 Operating Data
3.3.3 Setting Data for Saftey Switches
3.4 Weights of Main Engine Components
3.5 Tightening Specification for Heavy - duty Screwed Joints
3.5.1 Tightening Schedule
3.5.2 /3. Tightening Instructions
3.5.4 Hydraulic Tool for Annular Nuts
3.6 List of Compounds ( Sealing, Locking, Lubricating, Heat Conduction )
3.7 Use of Liquid Nitrogen
3.8 Dye Checking of Metal Surfaces with Distillate Fuel
4 Operating the Engine
4.1 Preparatory Work before Operating the Engine with Distillate Fuel
4.1.1 Preparatory Work before Operating the Engine with Heavy Fuel or MDF Blend
4.2 Running the Engine with Destillate Fuel
4.2.1 Running the Engine with Heavy Fuel or MDF Blend
4.3 Attendance in Service
4.4 Stopping the Engine Running on Destillate Fuel
4.4.1 Stopping the Engine Running on Heavy Fuel or MDF Blend
4.5 Checking Combustion by Indicator Diagrams
4.6 Run- in instructions
4.6.1 Drive type ”Fixed-pitch propeller and comparable drives ”
4.6.2 Drive type ”C.P. propeller with shaft generator, electric generators and comparable
drives”
4.7 Running the Engine with Defective Turbocharger
4.8 Emergency Operation
5 Engine Operating Media Systems
5.1 Fuel System
5.2 Lubrication Oil System
5.3 Cooling Water System
5.4 Pneumatic System
5.5 Injection Pump Plunger Sealing System
5.6 Injection Nozzle Cooling
5.7 Symbols Used in Piping Diagrams 0