Workshop Manual

D 2008/2009
Fuel system
W 07-04-01
© 02/2006 6011-001
2/4
6
z Turn crankshaft.
The marks (1) of the crankshaft toothed
wheel, intermediate gear and fuel injector
toothed wheel must be in line!
1
© 41066-0
z Push the measuring pin (1) through the marking
hole (arrow) into the crankcase.
The bore in the fuel injector toothed wheel
must be in line with the bore in the crank-
case.
1
© 41094-1
z Loosen blocking screw (1).
z Push locking ring (2) towards larger opening.
z Tighten blocking screw (1).
The blocking screw can now be screwed in
further.
The fuel injector shaft is blocked.
Attention!
Pay attention to perfect fit of the blocking
screw and locking plate.
1
2
© 41095-0