Workshop Manual

© 02/2006 6011-001
1/4
D 2008/2009
Fuel system
W 07-04-01
6
Removing and installing the fuel injector pump
Commercial available tools
Special tools:
– Measuring pin . . . . . . . . . . . . . . . 110180
– W 04-04-09
Attention!
Ensure utmost cleanliness when working
on the fuel system.
Carefully clean the area around the affec-
ted parts. Blow damp areas dry with com-
pressed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating fluids in suitable
vessels and dispose of according to regu-
lations.
Removing the fuel injector pump
z Remove gearcase cover.
 W 04-04-09
z Loosen pipe clip.
z Unscrew union nuts of the high pressure pipes.
z Remove all injection pipes.
© 41093-1