Workshop Manual

© 02/2006 6010-001
1/2
D 2008/2009
Exhaust system / Charging
W 06-07-03
6
Removing and installing the intake manifold
Commercial available tools
– Fitting compound
DEUTZ S1
Attention!
Ensure utmost cleanliness when working
on the fuel system.
Carefully clean the area around the affec-
ted parts. Blow damp areas dry with com-
pressed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating fluids in suitable
vessels and dispose of according to regu-
lations.
Removing the intake manifold
z Loosen pipe clip.
z Unscrew union nuts of the high pressure pipes.
z Remove all injection pipes.
© 41087-0
z Loosen hose clip (1).
z Unscrew screws (2).
z Remove intake manifold (3).
z Remove gasket (4).
z Unscrew fuel line (5).
1
2
3
4
5
© 41088-0