Workshop Manual

© 02/2006 6002-001
3/6
D 2008/2009
Drive system
W 02-09-03
6
z Remove piston rings with universal piston ring pliers.
z Check piston.
 W 02-09-07
© 41045-0
Completing con rod and piston
z Insert new locking ring.
z Insert con rod.
z Oil the piston bolt lightly.
z Press the piston bolt through.
z Insert new locking ring.
Ensure that the installation location is free
from faults.
The labelling on the piston base and the
numbered label of the connection rod face
the camshaft side.
Ensure that the installation location is free
from faults.
© 41047-1
Installing the piston and con rod
z Insert bearing shell in the con rod.
z Insert bearing shell in the respective big end bearing
cap.
Note the assignment of the bearing shells.
The anti-rotation lock (1) must lock in
groove (2).
Note the assignment of the bearing shells.
The anti-rotation lock must lock in groove.
?
1
2
© 41048-1