Workshop Manual

D 2008/2009
Drive system
W 02-09-03
© 02/2006 6002-001
2/6
6
Removing the big end bearing cap
z Position lifting bearing journal in LDC position.
z Unscrew screws (1).
z Remove big end bearing cap (2).
z Remove bearing shell (3).
Lay out components in the order in which
they should be installed.
Note order of cylinders.
3
2
1
© 41041-0
z Press out the piston and connection rod.
z Remove con rod bearing shells (1).
z Visually inspect the components.
Lay out components in the order in which
they should be installed.
Note order of cylinders.
1
© 41043-1
Removing the piston
z Remove locking ring with locking ring pliers.
z Press piston bolts out of piston and con rod.
z Remove connection rod.
z Visually inspect the components.
© 41044-1