Workshop Manual

© 02/2006 6001-001
5/10
D 2008/2009
Drive system
W 02-04-01
6
Installing the main bearing
z Oil bearing bush with engine oil.
z Press in bearing bush with assembly tool 143870.
Make sure the bearing bush is not twisted.
The installation depth is determined by the
assembly tool.
Mark the position of the lubricating oil bore
on the main bearing housing.
© 41058-1
z Oil bearing bush with engine oil.
z Mount bearing bush.
z Mount guide plate (1).
z Insert threaded rod (2).
z Insert counter support.
z Mount washers and screw on nuts.
Mark position of the lubricating oil bore.
Position bearing bush.
1
2
© 41062-1
z Turn the nut (1) clockwise.
The bearing bush is pressed into the
crankcase by the thrust pad.
The installation depth is determined by the
assembly tool.
Make sure the bearing bush is not twisted.
1
© 41063-1