Workshop Manual

© 02/2006 6001-001
3/10
D 2008/2009
Drive system
W 02-04-01
6
z Unscrew screws (1).
z Lever out main bearing housing (2) with a suitable
tool in the recess clearances.
z Visually inspect the components.
Make sure that the thrust washer halves do
not fall into the crankcase.
2
1
© 41034-1
z Unscrew screw (1).
z Remove oil suction pipe (2).
z Unscrew fixing screws (3).
z Remove oil pressure regulating valve (4).
 W 08-11-10
1
2
3
4
© 41059-0
z Remove crankshaft.
z Visually inspect the components.
© 41035-0