Workshop Manual

D 2008/2009

Drive system

W 02-02-02

2/2

z Turn in a self-tapping screw with washer.

z Pull out the crankshaft sealing ring with assembly le-

ver.

z Visually inspect all running surfaces.

Installing the crankshaft sealing ring

z Oil the sealing lip of the crankshaft sealing ring light-

ly.

z Place the crankshaft sealing ring on the assembly

tool.

z Mount the assembly tool on the crankcase pin.

z Drive in crankshaft sealing ring to the stop with the

assembly tool.

Use new crankshaft sealing ring.

The sealing lip faces the crankcase.

1 mm installation depth between connec-

tion housing and crankshaft sealing ring.

z Remove assembly tool.

z Install flywheel.

 W 12-06-01