Workshop Manual

© 02/2006 5992-001
3/6
D 2008/2009
Cylinder head
W 01-04-04
6
z Lift the cylinder head carefully from the crankcase.
z Remove gasket.
z Clean sealing surfaces.
Do not place cylinder head on sealing sur-
face.
© 41009-1
Installing the cylinder head
z Measure piston projection.
 W 01-04-09
Note installation position of the hydro tap-
pets.
Make sure the clamping bushings (1) are
in place.
1
1
© 41010-0
z Fit a new cylinder head gasket.
The sealing surfaces for the cylinder head
gasket must be clean and free of oil.
Label OBEN / TOP facing the cylinder
head.
© 41011-1