Workshop Manual

D 2008/2009
Cylinder head
W 01-02-02
02/2006 5991-001
2/2
6
Installing the rocker arm
z Grease the rocker arm (arrow) lightly.
z Mount rocker arm (3) and rocker arm bearing (2).
z Fasten screw (1).
Align rocker arm centred to the valve
spring!
1
3
2
© 41002-1
z Press down rocker arm (1) and pushrod.
z Tighten screw (2).
 27 Nm
Oil rocker arm lightly!
2
1
© 41004-1
z Clean sealing surfaces.
z Mount new gasket (4).
z Mount cylinder head cover (3).
z Fit on the venting hose (1).
z Tighten screws (2).
 27 Nm
z Tighten hose clip (1).
The sealing surfaces must be dry and free
from grease and dirt.
Tightening sequence: From the centre out-
wards.
2
1
4
3
© 41001-2