Workshop Manual

4
© 02/2006 5987-001
12/14
D 2008/2009
Technical data
Tightening specifications
A04 001 Cam shaft toothed gear on camshaft M12 x 1.75
D/TD 2008/ 2009
81 Nm
A04 004 Fuel injector toothed gear on fuel injector pump M14 x 1.5
D/TD 2008/ 2009
10 Nm 81 Nm
A04 005 Thrust washer camshaft on crankcase M8 x 1.25 Torx screw
D/TD 2008/ 2009
21 Nm
A04 011 Idler gear on crankcase M12 x 1.75
D/TD 2008/ 2009
81 Nm
A06 001 Exhaust manifold on cylinder head M8 x 1.25
D/TD 2008/ 2009
27 Nm
A06 030 Intake manifold on cylinder head
D/TD 2008/ 2009
27 Nm
A07 001 Clamping shoe fuel injector on cylinder head M8 x 1.25
D/TD 2008/ 2009
27 Nm
A07 003 Union nuts for high pressure pipes M12 x 1.5
D/TD 2008/ 2009
28 Nm
A07 006 Pipe clamp for high pressure pipes M6 x 1.0
D/TD 2008/ 2009
9 Nm
A07 013 Blocking screw on fuel injector pump
D/TD 2008/ 2009
10 Nm
A07 019 Fule line on fuel supply pump
D/TD 2008/ 2009
15 Nm
A07 024 Fuel supply pump on crankcase M8 x 1.25
D/TD 2008/ 2009
27 Nm
A07 031 Fuel injector pump on crankcase M8 x 1.25
D/TD 2008/ 2009
21 Nm
A07 084 Fuel lines on fuel filter console M10 x 1.5
D/TD 2008/ 2009
21 Nm
ID no. Name Screw type Notes / Remarks Series
Pre-clam- ping value
Post-clam- ping value