Workshop Manual

4
© 02/2006 5987-001
11/14
D 2008/2009
Technical data
Tightening specifications
ID no. Name Screw type Notes / Remarks Series
Pre-clam- ping value
Post-clam- ping value
A00 003 Engine mounting on crankcase M10 x 1.5
D/TD 2008/ 2009
41 Nm
A01 001 Cylinder head on crankcase M12 x 1.75 Use new screws
D/TD 2008/ 2009
35 Nm
35 Nm 60° 60°
A01 002 Rocker arm bracket on cylinder head M8 x 1.25
D/TD 2008/ 2009
27 Nm
A01 004 Cylinder head cover on cylinder head M8 x 1.25
D/TD 2008/ 2009
27 Nm
A01 092 Lifting log on cylinder head M8 x 1.25
D/TD 2008/ 2009
41 Nm
A02 010 Main bearing housing on crankcase M8 x 1.25
D/TD 2008/ 2009
15 Nm 27 Nm
A02 012 Main bearing housing on crankcase M10 x 1.5 Locking screw
D/TD 2008/ 2009
41 Nm
A02 013 Main bearing housing (assembly) M8 x 1.25 Hexagon socket
D/TD 2008/ 2009
21 Nm
A02 020 Big end bearing cap on connecting rod M8 x 1.0
D/TD 2008/ 2009
35 Nm
A03 020 Gear case cover on crankcase M8 x 1.25
D/TD 2008/ 2009
27 Nm
A03 030 Lubricating oil pan on crankcase M8 x 1.25
D/TD 2008/ 2009
32 Nm
A03 031 Drain plug on lubricating oil pan M14 x 1.5
D/TD 2008/ 2009
39 Nm
A03 080 Connection housing to crankcase M14 x 1.5
D/TD 2008/ 2009
81 Nm