Workshop Manual

3
User notes
© 12/2005 5983-001
6/6
3.5 Explanation of symbols
Danger!
of death or to health. Must be observed!
For example: The incorrect use or conver-
sion of the turbocharger can lead to serious
injury.
Caution!
Danger to the component/engine. Non-
compliance can lead to destruction of the
component/engine.
Must be observed!
Note
General notes on assembly, environmental
protection etc. No potential danger for man
or machine.
Tool
Conventional and special tools required for
the work.
Auxiliary materials
Working materials required in addition to
the tools for performing the work
(e.g. greases, oils, adhesives, sealants)
References
to important documents or job cards for the
work process.
For example: Job card W 04-05-05
Reference
to a document or a job card within the work
process.
Test and setting data
The necessary values are specified here.
If several values are necessary, a cross re-
ference is given to the Test and Setting Va-
lues table.
For example:
ID no. P01 61 = valve clearance, inlet
Tightening specification
The necessary values are specified here.
If several values are necessary, a cross re-
ference is given to the Tightening Specifi-
cations table.
For example:
ID no. A01 001 = cylinder head screws