Workshop Manual

© 02/2006 6025-001
1/4
D 2008/2009
Electrical system
W 13-02-03
6
Removing and installing the generator
Commercial available tools:
– V-belt tension measuring
device . . . . . . . . . . . . . . . . . . . . . . . 8115
Attention!
Only test / tighten / renew V-belts when the
engine is not running.
The V-belt tension of new V-belts must be
checked after they have been running for
15 minutes.
Removing the generator
z Disconnect the battery's negative terminal.
z Remove cable from generator.
© 41135-1
z Loosen screws (1).
z Unscrew screws (2).
z Press generator in direction of arrow.
z Remove V-belt.
2
1
1
© 41180-0