Workshop Manual

© 02/2006 6015-001
1/2
D 2008/2009
Fuel system
W 07-11-01
6
Removing and installing the fuel supply pump
Commercial available tools
Attention!
Ensure utmost cleanliness when working
on the fuel system.
Carefully clean the area around the affec-
ted parts. Blow damp areas dry with com-
pressed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating fluids in suitable
vessels and dispose of according to regu-
lations.
Removing the fuel supply pump
z Unscrew fuel line.
© 41103-0
z Unscrew screws (1).
z Remove fuel supply pump (2).
z Remove O-ring (3).
z Remove pump plunger (4).
z Visually inspect the components.
1
2
3
4
© 41104-0