Workshop Manual

© 02/2006 6013-001
1/2
D 2008/2009
Fuel system
W 07-07-01
6
Removing and installing the fuel injectors
Commercial available tools
Attention!
Ensure utmost cleanliness when working
on the fuel system.
Carefully clean the area around the affec-
ted parts. Blow damp areas dry with com-
pressed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating fluids in suitable
vessels and dispose of according to regu-
lations.
Removing the fuel injectors
z Pull the pipes (2) off the fuel injectors.
z Loosen pipe clip.
z Unscrew union nuts of the high pressure pipes.
z Remove all injection lines (1).
1
2
© 41096-0
z Unscrew screw (1).
z Remove clamping shoe (2).
z Pull out fuel injector (3).
z Remove sealing ring (4).
z Visually inspect sealing surface.
Attention!
Do not damage the sealing surfaces.
1
3
4
2
© 41097-0