Service Manual

6
Service and Maintenance
6.1 Lubrication System
6.1.3 Replace Oil Filter
Clean any dirt from the filter carrier sealing
surface.
Lightly oil the rubber gasket of the new lube
oil filter cartridge.
Manually screw in the new cartridge until
the gasket is flush.
Tighten the lube oil filter cartridge with
another half-turn.
Check the oil level, see 6.1.2
Check oil pressure, see 3.3.1.
Check lube oil filter cartridge seal for leaks.
Undo the lube oil filter cartridge using a
commercial tool and spin off.
Catch any escaping oil.
Caution is required in the case
of hot oil: Risk of scalding!
Please dispose of oil in an
environmentally-friendly
manner!
© 25 881 0© 25 880 0 © 25 882 0