Workshop Manual

© 01/2009 OBJ_DOKU-23533-001.fm
6/6
6
D 2011Other components
TD 2011W 12-02-01
Technical Data
Testing and setting data
Tightening specifications
ID no. Name Additional information Value
P12 11 V-belt tension, individual V-belts AVX 10 First assembly
450 N
P12 21 V-belt tension, individual V-belts AVX 10
Check after 15 minutes running
under load
300 N
ID no. Name Screw type Notes / Remark Value
A12 041
V-belt tensioning pulley (holder) on
front cover
M10x25-8.8 45 Nm
A13 012 Generator on console M8x75-10.9 31 Nm
A13 015 Clamping bracket on generator
M8
M8x30-8.8
M8x35-8.8
22 Nm
A13 016 Clamping bracket on console M10x25-10.9 43.5 Nm
For the tightening procedure according to torque using a torque wrench, a maximum variation of the
tightening torque of +/- 10% is permissible.
+ 50
- 50
+ 20
- 20