Workshop Manual

© 01/2009 18663-001
12/12
6
D 2011Fuel system
TD 2011W 07-04-01
Technical Data
Testing and setting data
Tightening specifications
ID no.
Thickness of shim
(difference S
s
cal-
culated)
Dimension a of the
identification
Thickness of shim Part number
P07 21
bis 0,375 17 mm 0,35 mm 04287618
0,3751 - 0,425 15 mm 0,40 mm 04287619
0,4251 - 0,475 20 mm 0,45 mm 04287620
0,4751 - 0,525 18 mm 0,50 mm 04287621
0,5251 - 0,575 23 mm 0,55 mm 04287622
0,5751 - 0,625 21 mm 0,60 mm 04287623
0,6251 - 0,675 26 mm 0,65 mm 04287624
0,6751 - 0,725 24 mm 0,70 mm 04287625
0,7251 - 0,775 8 mm 0,75 mm 04287626
0,7751 - 0,825 27 mm 0,80 mm 04287627
0,8251 - 0,875 11 mm 0,85 mm 04287628
0,8751 - 0,925 30 mm 0,90 mm 04287629
0,9251 - 0,975 29 mm 0,95 mm 04287630
0,9751 - 1,025 33 mm 1,00 mm 04287631
1,0251 - 1,075 7 mm 1,05 mm 04287632
1,0751 - 1,125 10 mm 1,10 mm 04287633
1,1251 - 1,175 13 mm 1,15 mm 04287634
1,1751 - 1,250 16 mm 1,20 mm 04287635
1,2501 - 1,36 19 mm 1,30 mm 04287636
ID no. Name Screw type Notes / Remark Value
A01 004 Cylinder head cover on cylinder head 8.5 Nm
A03 004 Locking screw on crankcase
Adapter for adjustable
bolt on control linkage
lock.
Replace sealing ring.
18 Nm
A07 012 Injection pump on crankcase 21 Nm
For the tightening procedure according to torque using a torque wrench, a maximum variation of the
tightening torque of +/- 10% is permissible.