Workshop Manual

1/4
6
2011
Other components
W 12-02-01
W 12-02-01 Check, renew V-belt
(in FM, BFM engines)
Tools
- Commercial tools
8115 - V-belt pulley tension measuring
appliance
Note
- The V-belt tension of new V-belts must
be checked after they have been running
for 15 minutes.
- One variant has been described. The
procedure is the same accordingly for
other variants.
Caution!
Only test / tighten / renew V-belts with the
engine at a standstill.
!
Test V-belt
z Inspect the V-belt visually for wear all round.
© 39370 0
Renew V-belt
z Loosen screws (1).
z Loosen screw (2).
Note
Hold nuts (arrow).
© 39371 0
1
3
2
© 11/2004 0312 1626 - 0138