Workshop Manual

0312 1577 - 0138

10/24

Crankcase

W 03-08-03

2011

z Insert the speed adjustment lever (1) with shaft,

guide bush and new round sealing ring.

Note

Oil the speed adjustment shaft lightly.

z Insert adjustment lever (1) with clamping pin.

Note

Note the installation position, the hole for

hooking in the regulator spring (arrow) must

face the outside of the front cover.

z Press the speed adjustment shaft (2) into the front

cover to the stop.

z Drive in clamping pin (1) flush with the adjustment

lever.

Note

The bore in the speed adjustment shaft must

match up with the bore in the adjustment

lever.