Workshop Manual

0312 1646 - 0138
7/10
0312 1646 - 0138
5
5 Job card overview
5.3 Job card references
2011
07 Fuel system
Job card Activity Other job cards necessary for performing the activity
W 07-02-06
Remove and install control
linkage and guide bushes
W 03-08-01 W 03-09-04
W 07-04-01
(Motorpal)
W 07-04-01
(Bosch)
W 07-08-02
W 08-11-12 W 09-11-01 W 13-02-03
W 07-02-07
Remove and install lifting
magnet for start volume
release
W 07-03-01 Renew injection lines W 08-08-02
W 07-04-01
Remove and install
injection pumps (Bosch)
W 07-03-01 W 07-06-04 W 07-10-06
W 07-04-01
Remove and install
injection pumps (Motorpal)
W 07-03-01 W 07-06-03 W 07-06-04 W 07-10-06
W 07-06-03
Determine the thickness of
the shim gasket
W 07-04-01
W 07-06-04 Check start of pumping W 07-03-01
W 07-10-06
(Bosch)
W 07-10-06
(Motorpal)
W 11-00-03
W 07-07-01
Remove and install
injection valves
W 07-03-01
W 07-07-02
Check and repair injection
valve
W 07-07-05 W 07-07-01
W 07-07-05
Checking and setting
injection valves (leak fuel-
less)
W 07-07-01
W 07-08-01
Remove and install
solenoid valve (LDA)
W 07-08-02
Remove and install charge
pressure-depedent full
load stop (LDA)
W 07-10-06
Remove and install fuel
lines (with Bosch injection
pumps)
W 08-08-02
W 07-10-06
Remove and install fuel
lines (with leak fuel line)
W 07-10-08
Remove and install fuel
filter console