Workshop Manual

0312 1645 - 0138
5/6
© 11/2004
5
5 Job card overview
5.2 Sorted numerically
2011
W 07-07-01 Remove and install injection valves Fuel system
W 07-07-02 Check and repair injection valve Fuel system
W 07-07-05 Checking and setting injection valves (leak fuel-less) Fuel system
W 07-08-01 Remove and install solenoid valve (LDA) Fuel system
W 07-08-02
Remove and install charge pressure-depedent full load stop
(LDA)
Fuel system
W 07-10-06 Remove and install fuel lines (with Bosch injection pumps) Fuel system
W 07-10-06 Remove and install fuel lines (with leak fuel line) Fuel system
W 07-10-08 Remove and install fuel filter console Fuel system
W 07-11-01 Remove and install fuel pump Fuel system
W 08-04-05 Remove and install lube oil pump Lube oil system
W 08-04-06 Remove and install oil intake pipe Lube oil system
W 08-04-07 Remove and install lube oil tray Lube oil system
W 08-08-02 Remove and install oil cooler Lube oil system
W 08-10-06 Remove and install oil filter cartridge Lube oil system
W 08-11-02 Remove and install oil pressure regulating valve, check Lube oil system
W 08-11-07 Remove and install oil filter console Lube oil system
W 08-11-08 Remove and install oil pressure switch Lube oil system
W 08-11-09 Remove and install oil pressure sensor Lube oil system
W 08-11-11 Remove and install oil temperature sensor Lube oil system
W 08-11-12 Remove and install oil thermostat (oil cooler) Lube oil system
W 08-15-01 Remove and install oil pressure line (turbocharger) Lube oil system
W 08-15-02 Remove and install oil return line (turbocharger) Lube oil system
W 08-16-01 Remove and install oil line for injection adjuster supply Lube oil system
W 08-16-02
Remove and install oil temperature sensor (in engines with
injection adjustment)
Lube oil system
Job card Activity Maintenance group