Workshop Manual

0312 1643 - 0138
9/14
© 11/2004
4
4 Technical data
4.2 Tightening specifications
2011
07000 Fuel system
06030 Air intake pipe on cylinder head 21 Nm
Charge air on cylinder head 21 Nm
06094 Solenoid valve on LDA 10 Nm
ID no. Name
Pre-
tightening
value
Re-tightening
value
Remark
07001 Injection valve on cylinder head 21 Nm
07002 Injection nozzles lock nut on
nozzle holder (leak oil-less)
35 ± 5 Nm Motorpal
Injection nozzles lock nut on
nozzle holder
45 ± 5 Nm Bosch
07003 Injection line on:
• Injection valve
• injection pump
25 ± 2.5 Nm Union nut
07012 Injection pump on (Bosch/
Motorpal) crankcase
21 Nm
07015 Fuel supply line to injection pump
29 Nm
• Hollow screw
• DIN 7643-8
07024 Fuel pump on crankcase
21 Nm
• Piston pump
• Diaphragm pump
07061 Overcurrent line to injection pump
29 Nm
• Renew CU sealing rings
• Hollow screw
07062 Overcurrent line to cylinder head
bolt
8.5 Nm
07071 Locking screw on injection pump
(Motorpal)
45 ± 5 Nm Renew CU sealing rings
07082 Fuel filter console on crankcase 21 Nm
07087 Fuel filter console on holder
27 Nm
• Hexagon bolt M8 x 50mm
and hexagon nut M8
ID no. Name
Pre-
tightening
value
Re-tightening
value
Remark