Workshop Manual

Other components

W 12-08-03

0312 1631 - 0138

5/8

2011

z Remove locking pin (1).

z Turn the setting eccenter in the direction of the arrow

(counterclockwise) until the pointer of the clamping

roller is in line with the notch (1).

Note

Turn the setting eccenter at the hexagon

socket.

z Tighten screw (2).

12052

z Turn the crankshaft 2 turns in the engine’s direction

of rotation (arrow).

z Check the toothed belt tension.

Note

- The pointer of the clamping roller must be in

line with the notch (1).

- If the marks are not in line, the toothed belt

tension must be corrected.