Workshop Manual

0312 1631 - 0138

4/8

Other components

W 12-08-03

2011

z Screw in screw (1) and position setting eccenter

(arrow) at 12.00 h position.

z Pre-tighten screw.

12052

z Mount new toothed belt.

Note

Note running direction of the toothed belt. The

labeling (arrow) on the toothed belt must be

legible from the front.

z Align the toothed belt so that it is touching the

crankshaft gear wheel at the guide joint (1) and the

hydraulic pump gear about 4 mm behind the front

edge (arrow).