Workshop Manual

0312 1612 - 0138
4/8
© 11/2004
6
Lube oil system
W 08-11-02
2011
z Unscrew transfer nipple (1) for heater supply and
remove sealing ring.
z Unscrew transfer nipple (2) for heater return and
remove sealing ring.
Note
When removing the transfer nipple (2) the
following parts may jump out under the
pressure of the compression spring.
© 34080 1
1
2
z Unscrew caps (1) and remove sealing ring.
Note
When removing the cap the following parts
may jump out under the pressure of the
compression spring.
© 34079 1
1
z Remove compression springs and valve piston (1).
Note
Set down the components in the order of
installation.
© 34078 1
1
1