Workshop Manual

0312 1642 - 0138
15/22
© 11/2004
4
4 Technical data
4.1 Test and adjustment data
2011
03 00 Crankcase
02 99 Piston ring height 3rd piston ring Roof chamfer ring 2.975 - 2.990 mm
ID
No.
Name Additional information Value Unit
03 10 Camshaft bearings
03 11 Bore diameter for camshaft bearing liner
in crankcase
Fit H7 58
+0.030
mm
03 12 External diameter of the camshaft
bearing liner
Standard 58.075
+0.045
mm
03 13 Internal diameter of the camshaft
bearing liner
in the installed state 54.000 - 54.054 mm
03 14 Camshaft bearing liner Wear limit 54.08 mm
03 20 Bore for camshaft main bearing
03 21 Diameter of the main bearing bore • Standard
• Fit H6
75.000
+0.019
mm
03 27 Fit bearing width on crankcase
30
- 0.033
mm
03 30 Cylinder
03 31 Bore diameter of the cylinder
Standard 94.000
+ 0.020
mm
03 32 Bore diameter of the cylinder Wear limit 94.1 mm
03 41 Bore diameter of the cylinder
Overmeasure step 94.500
+ 0.020
mm
03 42 Bore diameter of the cylinder Wear limit of the
overmeasure step
94.6 mm
ID
No.
Name Additional information Value Unit