Workshop Manual

1/6
6
2011
Fuel system
W 07-08-02
W 07-08-02 Remove and install charge pressure full load stop (LDA)
Tools
- Commercial tools
8011 - Clamping pliers
8027 - Pliers insert
- Special tools
170 050 - Special wrench
Caution!
Observe the safety regulations and
national specifications for handling fuels!
Note
- Collect drained operating materials in
suitable vessels and dispose of
according to regulations.
- A test stand run is necessary to set the
charging pressure-dependent full load
stop.
!
Remove charging pressure full load stop
In FL, BFL engines
z Unscrew screws (1) and remove the air duct cover
(2).
© 39080 0
2
1
1
z Pull the cable plug out of the solenoid valve (1) if
available.
z Pull out the underpressure line (2).
© 39381 0
2
1
© 11/2004 0312 1602 - 0138