Workshop Manual

0312 1599 - 0138
4/4
© 11/2004
6
Fuel system
W 07-07-02
2011
z Mount the injection nozzle with the centering bores
on the centering pins of the adapter.
Note
The nozzle needle may not fall out of the
nozzle body.
© 33910 1
z Screw on the nozzle clamping nut.
© 33911 1
z Tighten the nozzle clamping nut.
z Remove the injection valve from the holder.
z Check and set injection valves
Î Job card W 07-07-05
z Install injection valves
Î Job card W 07-07-01.
© 33912 1
07002