Workshop Manual

1/6
6
2011
Fuel system
W 07-07-01
W 07-07-01 Remove and install injection valves
(in engines with leak fuel line)
Tools
- Commercial tools
8011 - Clamping pliers
- Special tools
110 030 - Extractor
150 800 - Extraction tool
Note
- Cleanliness is extremely important when
working on the injection equipment.
- Collect drained operating materials in
suitable vessels and dispose of
according to regulations.
References
- W 07-03-01
Remove injection valve
z Remove injection lines
Î Job card W 07-03-01.
In engines with leak fuel line
z Loosen pipe clips (1) and pull off return pipes (2).
z Unscrew screws and remove overflow pipe (3).
© 34031 1
1
2
3
z Unscrew screw (1) and remove clamping claw (2).
© 39485 0
1
2
© 11/2004 0312 1598 - 0138