Workshop Manual

0312 1642 - 0138
12/22
© 11/2004
4
4 Technical data
4.1 Test and adjustment data
2011
02 71 Diameter of the piston • Measuring point 1 at
height 22 mm
• FL/M engines
93.920
mm
• Measuring point 1 at
height 25 mm
• BFL/M engines
93.900
• Measuring point 1 at
height 25 mm
• BFL engines without
cooling duct
93.880
02 72 Diameter of the piston • Measuring point 2 at
height 44.5 mm
• FL/M engines
93.856
mm
• Measuring point 2 at
height 47 mm
• BFL/M engines
93.840
• Measuring point 2 bat
height 47 mm
• BFL engines without
cooling duct
93.820
02 73 Diameter of the piston • Measuring point 3 at
height 69.7 mm
• FL/M engines
93.670
mm
• Measuring point 3 at
height 66.5 mm
• BFL/M engines
93.720
• Measuring point 3 at
height 66.5 mm
• BFL engines without
cooling duct
93.700
02 74 Overmeasure graduation 0.5 mm
02 75 Piston overlap for cylinder head gasket 1 Notch 0.514 - 0.69 mm
02 76 Piston overlap for cylinder head gasket 2 Notches 0.691 - 0.76 mm
02 77 Piston overlap for cylinder head gasket 3 Notches 0.761 - 0.83 mm
ID
No.
Name Additional information Value Unit