Workshop Manual

1/4

2011

Fuel system

W 07-06-03

W 07-06-03 Determine the thickness of the shim gasket

Tools

- Commercial tools

8170 - Depth measuring appliance

Note

- All contact and measuring surfaces must

be absolutely clean to rule out measuring

errors!

- The following work procedure must

be performed for every injection pump if

necessary.

References

- W 07-04-01 (Motorpal)

z Remove injection pump and compensation gasket.

z Removal and installation of roller tappet, visual

inspection.

Î Job card W 07-04-01(Motorpal)

z Mount probe for measuring range 50 to 75 mm

on depth measuring screw.

Note

Presetting of the measuring range

approx. 52 mm.